Maytag UXT5236BDS Przewodnik Instalacji Strona 6
- Strona / 30
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
6
INSTALLATION INSTRUCTIONS
NOTES:
■ Depending on your model, determine which venting method
to use: roof, wall or non-vented (recirculating).
■ It is recommended that the vent system be installed before the
range hood is installed. Go to “Venting System” in the
“Installation Requirements” section if you need assistance.
■ Before making cutouts, make sure there is proper clearance
within the ceiling or wall for the vent system.
1. Disconnect power
2. Mark Hole Locations
Align the exterior edge of the mounting brackets with the exterior
edges of the upper cabinet.
IMPORTANT: The brackets should touch the upper cabinet.
With a pencil, mark the upper holes on the brackets.
3. Install Brackets
■ Using a #2 Phillips screwdriver, install the drywall anchors.
■ Using #8-18 x 1" (4.2 x 25 mm) flat-head #2 Phillips screws,
install the mounting brackets using the upper holes.
NOTE: For installations to a surface other than drywall, it is
recommended that a qualified contractor determine the
anchoring method.
4. Prepare Range Hood
■ Set the range hood on its back on a covered surface.
■ Remove the filter, locking screw, and side panels.
■ Remove the rectangular damper.
■ Using a #2 Phillips screwdriver, remove the electrical box
cover.
■ Using a flat-blade screwdriver, remove the appropriate power
supply knockout.
5. Mark Hole Locations
Lift the range hood into place and insert the mounting bracket
tabs through the slots in the back of the range hood.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
- HOTTE D’ASPIRATION DE 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- INSTALLATION REQUIREMENTS 3
- Venting System 4
- Electrical Requirements 5
- INSTALLATION INSTRUCTIONS 6
- 6. Mark and Cut Vent Opening 7
- 7. Drill Electrical Opening 7
- Mounting Tabs 8
- 10. Mount Range Hood 8
- 11. Connect Vent System 9
- 13. Complete the Installation 9
- RANGE HOOD USE 10
- RANGE HOOD CARE 10
- WIRING DIAGRAM 11
- ASSISTANCE OR SERVICE 12
- AVERTISSEMENT 14
- EXIGENCES D’INSTALLATION 16
- Exigences d’emplacement 17
- Circuit d’évacuation 18
- Spécifications électriques 19
- INSTRUCTIONS D’INSTALLATION 20
- 6. Marquage et découpage de 21
- (8,3 x 25,4 cm) 22
- UTILISATION DE LA HOTTE 24
- ENTRETIEN DE LA HOTTE 25
- SCHÉMA DE CÂBLAGE 26
- Au Canada 27
- WHIRLPOOL CORPORATION 28
- Printed in Mexico 30
- Imprimé au Mexique 30
Powiązane produkty i podręczniki dla Okapy kuchenne Maytag UXT5236BDS
(24 strony)Philips AX1001 manuály
Uživatelské manuály a uživatelské příručky pro CD přehrávače Philips AX1001.
Poskytujeme manuály pdf Philips AX1001 ke stažení zdarma podle typů dokumentů:
Komentarze do niniejszej Instrukcji